Identity Finder for Mac v6.0

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

Note: If you are upgrading from version 5.2 or earlier, all important notes for that 
version apply and can be viewed in the cumulative release notes:

    Cumulative release notes.
Identity Finder for Mac is available for download here: http://www.identityfinder.com/us/Business/Downloads/Mac

Note:  The DLP Console should be upgraded to version 6.x before any clients are upgraded to version 6.x.

Note: Beginning with version 6.0, when DLP Endpoint for Mac clients are connected to console,
no AnyFinds or Search Locations will be enabled by default.  New console installations (v6 and later) will include a
default policy applied to all endpoints that enables the same AnyFinds/Search
Locations as the old application defaults. 
For existing (5.x) console installations, if the client application defaults
were relied upon, it will be necessary to update policies to explicitly enable the
desired AnyFinds and Search Locations.

Identity Finder for Mac version 6.0
Added the ability to use the Mac OS Keychain for SSL certificates for communication with the console.
Console\caUseKeychain
Console\caCommonName
Redesigned Custom Types and added a dedicated Dictionary search in addition to Keywords and Regular Expressions
Updates to MultiFind to:
Allow the use of CVV/CID number and/or Expiration Date to validate Credit Card Numbers
Allow the use of NPI and/or DEA numbers to validate PHI
Use Dictionaries, Regular Expressions and Keyword custom types
Updates to AnyFind
Added Passport Number AnyFind 
Updated Social Security Number, Driver License and Personal Address AnyFind to improve accuracy
Update to Date of Birth AnyFind to allow the use of a dynamic date range
Settings\Identities\DateOfBirth\AnyFind\EnableAnyFindVariableDobRange: (Disable/0 (Default), Enable/1)
Settings\Identities\DateOfBirth\AnyFind\VariableDobRangeYearsOffset: Number of years - 18 (Default)
Added the ability to use custom negative keywords for CCNs
Settings\Identities\CCN\AnyFind\CustomNegativeKeywords
Settings\Identities\CCN\AnyFind\UseNegativeKeywords (Disabled/0 (Default), Enabled/1)
Added the ability to save and/or send to console the first 6 and last 4 digits of credit card number matches
Settings\Save\CSVReportOptions (New option “Mask all but the last 4 characters of the match (and first six for CCNs)/32768)
Settings\Save\HTMLReportOptions (New option “Mask all but the last 4 characters of the match (and first six for CCNs)/32768)
Console\sendMatchLastFourOnly (New option “Last four only (and first six for CCNs)/2)
Update to improve formatting in several log messages
Update to adjust the max memory file size setting to match max file size setting when latter is >128MB
Update use of first run in guest mode to work on right-click search and search now tasks
Updates to Search History
Updates to better interact with MultiFind and Custom types
Added/Updated the ability to use Search History with tasks and in Guest mode
Initialization\Configuration\UseSearchHistoryPolicySettingsWithScheduledTasks (Enable/1 (Default), Disable/0)
Initialization\Configuration\UseSearchHistoryPolicySettingsInGuestMode (Disable/0 (Default), Enable/1)
Update to address an issue that can occasionally cause a file with matches to be recorded in the Search History database
Updates to the endpoint service:
Added log retention and rollover
Console\EPSLogs\AutoDeleteMoreThanMaxLogsOnExit
Console\EPSLogs\AutoDeleteMoreThanMaxLogsOnExitThreshold
Console\EPSLogs\AutoDeleteOldLogsOnExit
Console\EPSLogs\AutoDeleteOldLogsThreshold
Updates to the states reported by the endpoint service/client to the console to include in progress updates for searches run as scheduled tasks, for interactive sessions, and for client upgrades initiated via the console.
Console\ClientActivityStateDataConfiguration
Updates to improve the client upgrade process
Update to allow environment variable expansion
Update to ensure that all weekly and monthly tasks respect their start time window
Update to address an issue applying the option to not start missed task when endpoint is new
Update to address an issue shredding files with specific characters in their name
Update to address an issue that can cause tasks to be missed
Update to address an issue that could cause the eps to stop a currently running task and run a new one even if it should not
Update to report the exact same version information from the client and endpoint service
Update to disable Customer Experience participation by default
Updates to Preview display to improve layout for locations with high order Ascii characters 
Update to address an issue with logging on shut down
Update to address an issue updating action information after shredding MBOX files
Update use of first run in guest mode to work on search now tasks.
Added a setting to the UI for maximum file size to search
Added the ability to Mask Matches in the Results View and Preview Pane
Update to improve the wording of the Scrub dialog
Update to address an issue with log information sent to the console
Update to the Results View to allow column sorting
Update to address an issue when attempting to shred a read-only mounted DMG
Updates to improve certificate handling
Update to address an issue saving results files when saving only the last four characters of a match
Implemented ability to delete client logs that are X days old or older
Settings\Logging\AutoDeleteOldLogsOnExit(0 (default): Disabled, 1: Enabled)
Settings\Logging\AutoDeleteOldLogsThreshold (>0: Delete logs when the client exits if they are old than this many days.  Default: 60)
Implemented ability to keep only the most recent X client logs
Settings\Logging\AutoDeleteMoreThanMaxLogsOnExit (0 (default): Disabled, 1: Enabled)
Settings\Logging\AutoDeleteMoreThanMaxLogsOnExitThreshold (>0: Keep a maximum of this many logs and delete the oldest when the client exits when there are more than this many.  Default: 10)

Edited by Product Management - 11 Jun 2012 at 10:12am

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Product Management Members Profile Send Private Message Find Members Posts Add to Buddy List Admin Group Joined: 24 Nov 2010 Status: Offline Points: 171	Post Options Post Reply Quote Product Management Report Post Thanks(0) Quote Reply Topic: Identity Finder for Mac v6.0 Posted: 10 Jun 2012 at 10:31am
	Note: If you are upgrading from version 5.2 or earlier, all important notes for that version apply and can be viewed in the cumulative release notes: Cumulative release notes. Identity Finder for Mac is available for download here: http://www.identityfinder.com/us/Business/Downloads/Mac Note: The DLP Console should be upgraded to version 6.x before any clients are upgraded to version 6.x. Note: Beginning with version 6.0, when DLP Endpoint for Mac clients are connected to console, no AnyFinds or Search Locations will be enabled by default. New console installations (v6 and later) will include a default policy applied to all endpoints that enables the same AnyFinds/Search Locations as the old application defaults. For existing (5.x) console installations, if the client application defaults were relied upon, it will be necessary to update policies to explicitly enable the desired AnyFinds and Search Locations. Identity Finder for Mac version 6.0 Added the ability to use the Mac OS Keychain for SSL certificates for communication with the console. Console\caUseKeychain Console\caCommonName Redesigned Custom Types and added a dedicated Dictionary search in addition to Keywords and Regular Expressions Updates to MultiFind to: Allow the use of CVV/CID number and/or Expiration Date to validate Credit Card Numbers Allow the use of NPI and/or DEA numbers to validate PHI Use Dictionaries, Regular Expressions and Keyword custom types Updates to AnyFind Added Passport Number AnyFind Updated Social Security Number, Driver License and Personal Address AnyFind to improve accuracy Update to Date of Birth AnyFind to allow the use of a dynamic date range Settings\Identities\DateOfBirth\AnyFind\EnableAnyFindVariableDobRange: (Disable/0 (Default), Enable/1) Settings\Identities\DateOfBirth\AnyFind\VariableDobRangeYearsOffset: Number of years - 18 (Default) Added the ability to use custom negative keywords for CCNs Settings\Identities\CCN\AnyFind\CustomNegativeKeywords Settings\Identities\CCN\AnyFind\UseNegativeKeywords (Disabled/0 (Default), Enabled/1) Added the ability to save and/or send to console the first 6 and last 4 digits of credit card number matches Settings\Save\CSVReportOptions (New option “Mask all but the last 4 characters of the match (and first six for CCNs)/32768) Settings\Save\HTMLReportOptions (New option “Mask all but the last 4 characters of the match (and first six for CCNs)/32768) Console\sendMatchLastFourOnly (New option “Last four only (and first six for CCNs)/2) Update to improve formatting in several log messages Update to adjust the max memory file size setting to match max file size setting when latter is >128MB Update use of first run in guest mode to work on right-click search and search now tasks Updates to Search History Updates to better interact with MultiFind and Custom types Added/Updated the ability to use Search History with tasks and in Guest mode Initialization\Configuration\UseSearchHistoryPolicySettingsWithScheduledTasks (Enable/1 (Default), Disable/0) Initialization\Configuration\UseSearchHistoryPolicySettingsInGuestMode (Disable/0 (Default), Enable/1) Update to address an issue that can occasionally cause a file with matches to be recorded in the Search History database Updates to the endpoint service: Added log retention and rollover Console\EPSLogs\AutoDeleteMoreThanMaxLogsOnExit Console\EPSLogs\AutoDeleteMoreThanMaxLogsOnExitThreshold Console\EPSLogs\AutoDeleteOldLogsOnExit Console\EPSLogs\AutoDeleteOldLogsThreshold Updates to the states reported by the endpoint service/client to the console to include in progress updates for searches run as scheduled tasks, for interactive sessions, and for client upgrades initiated via the console. Console\ClientActivityStateDataConfiguration Updates to improve the client upgrade process Update to allow environment variable expansion Update to ensure that all weekly and monthly tasks respect their start time window Update to address an issue applying the option to not start missed task when endpoint is new Update to address an issue shredding files with specific characters in their name Update to address an issue that can cause tasks to be missed Update to address an issue that could cause the eps to stop a currently running task and run a new one even if it should not Update to report the exact same version information from the client and endpoint service Update to disable Customer Experience participation by default Updates to Preview display to improve layout for locations with high order Ascii characters Update to address an issue with logging on shut down Update to address an issue updating action information after shredding MBOX files Update use of first run in guest mode to work on search now tasks. Added a setting to the UI for maximum file size to search Added the ability to Mask Matches in the Results View and Preview Pane Update to improve the wording of the Scrub dialog Update to address an issue with log information sent to the console Update to the Results View to allow column sorting Update to address an issue when attempting to shred a read-only mounted DMG Updates to improve certificate handling Update to address an issue saving results files when saving only the last four characters of a match Implemented ability to delete client logs that are X days old or older Settings\Logging\AutoDeleteOldLogsOnExit(0 (default): Disabled, 1: Enabled) Settings\Logging\AutoDeleteOldLogsThreshold (>0: Delete logs when the client exits if they are old than this many days. Default: 60) Implemented ability to keep only the most recent X client logs Settings\Logging\AutoDeleteMoreThanMaxLogsOnExit (0 (default): Disabled, 1: Enabled) Settings\Logging\AutoDeleteMoreThanMaxLogsOnExitThreshold (>0: Keep a maximum of this many logs and delete the oldest when the client exits when there are more than this many. Default: 10) Edited by Product Management - 11 Jun 2012 at 10:12am